Dektite original roof flashings

This Dektite EPDM flashing is suitable for twin wall insulated flue pipe penetrations through profiled roofs and flat roofs. The base of the flashing has a metal strip embedded in it. The edge of the flashing is moulded to the shape of the roof and the metal strip helps to preserve this shape. The flashing is then sealed to the roof using silicone and held down with screws or bolts whichever is appropriate.

The flashing highlighted in orange below is the DF 106 Dektite original flashing. This flashing is suitable for our budget twin wall flue pipe as well as our standard twin wall flue pipe.
The fixing fix that goes with the DF 106 flashing is also highlighted.

Fixing kits are available that contain screws, screw covers and silicone but do not get the kit if you will be using bolts to fasten the flashing. The kit is ideal for use with wooden roofs.

DEKTITE ORIGINAL
DEKTITE ORIGINAL ROUND FLASHING
DF100G DEKTITE ROUND FLASHING		£7
DF101G DEKTITE ROUND FLASHING		£8.75
DF102G DEKTITE ROUND FLASHING		£11.25
DF103G DEKTITE ROUND FLASHING		£14.75
DF104G DEKTITE ROUND FLASHING		£19.5
DF105G DEKTITE ROUND FLASHING		£22.75
DF106G DEKTITE ROUND FLASHING		£27
DF107G DEKTITE ROUND FLASHING		£41.5
DF108G DEKTITE ROUND FLASHING		£50
DF109G DEKTITE ROUND FLASHING		£100


FIXING KITS
KIT 1		£8.75
KIT 2		£12.25


LOW MODULUS SILICONE		£5.5

Dekitite orignal flashing sizing chart

Installation instructions for the original flashing

Dektite original flashing fitting instructions