Oakfire 3 workshop stove - Oakfire3 sawdust stove
The Oakfire 3 is a 15kW workshop stove suited to burning a wide variety of fuels including sawdust, shavings, offcuts and logs. The Oakfire 3 is strongly made from 5mm steel, has primary and secondary air controls and a baffle plate.
Primary air vent
This is the secondary air vent which controls the amount of air coming through the air supply tube and into the workshop stove fire chamber.
Primary air supply tube
Here is the air supply tube for the Oakfire 3 workshop stove.There is a stainless steel outer tube made of mesh which means that, when burning sawdust, it can be lit by dropping a fire lighter down the tube so that the fuel can burn from the bottom up. Other workshop stoves can only burn from the top down, which is very inefficient. When burning from the top down only the top of the stove will be hot, when burning from the bottom up the whole stove gets hot. Oakfires are the only workshop stoves that have double tube technology.
Primary air vent
This is the primary air vent on the front of the stove, with the holes in the shape of the Oakleaf motif which I think is a really nice touch.
Each Oakfire workshop stove comes with an operating tool.
More information about the various features of Oakfire stoves can be found on the main Oakfire workshop stoves page
|≈ Area heated|
Use our workshop stove size wizard to see which Oakfire stove you should use to heat your workshop.
Our installation assistant can help you to design the flue system for your workshop stove.
Or you may know what you want in which case just add the stove and whatever you need to your shopping cart.
Price: £510 inc VAT